Geekvape Digi Pro Pod Kit

Digi Pro Pod Vape Kit

The Geekvape Digi Pro Vape has a real touchscreen you can swipe and tap instead of pressing buttons, and it’s got three different modes (Smart, Boost, Eco) that change how much power you’re getting. The battery’s 2000mAh so it’ll run all day, charges back to full in 30 minutes, and you’re getting up to 40W which is higher than most touchscreen pod kits. The Digi Pro works with J cartridges that have built-in coils or J Series replacement coils where you just swap the coil out, and there’s four resistances (0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω) covering MTL and RDL.The touchscreen shows your battery, wattage, and puff count, plus there’s RGB lights running down the side that change colour based on which mode you’re using. Top airflow controls on the cartridge so you can adjust between tight MTL draws and looser RDL hits. You can fire it by pressing the button or just taking a draw, and there’s an A-lock on the screen that stops it firing in your pocket.Smart Mode works out which cartridge you’ve got slotted in and sets the wattage automatically, Boost Mode cranks the power up for bigger clouds, and Eco Mode drops it down to save battery. The Digi Pro runs nic salts or 50/50 e-liquids depending on your resistance, and the 2ml cartridges have leak-proof seals. It comes in eight colours and the 30-minute charge time’s one of the fastest for a 2000mAh pod kit.

Geekvape Digi Pro Key Features

• 2000mAh battery charges in 30 minutes
• 40W output with three modes
• 0.96-inch touchscreen you can swipe
• Smart Mode sets wattage automatically
• Boost Mode for bigger power
• Eco Mode saves battery
• RGB lights change with modes
• Top airflow adjusts for MTL/RDL
• Button or auto-draw activation
• A-lock stops pocket firing
• J and JR cartridges (0.4Ω-1.2Ω)
• 2ml capacity leak-proof
• 8 colours

2000mAh Battery Charging in 30 Minutes

The Digi Pro’s got a 2000mAh battery that’ll last you all day if you’re vaping MTL or around 8-10 hours on RDL at higher wattages. USB-C gets it from flat to 100% in 30 minutes which is faster than most pod kits with this size battery. The RGB lights show you what charge level you’re at through different colours, and you’re getting 1000-1500 puffs depending on which mode you’re running and how long your draws are.

Touchscreen with Swipe Controls

The touchscreen on the Digi Pro’s 0.96 inches and you swipe between modes instead of clicking through menus with buttons. It shows your battery percentage, wattage, coil resistance, and how many puffs you’ve done. Swipe left or right to switch between Smart, Boost, and Eco modes, and the screen brightness adjusts on its own. The RGB strip down the side changes colours matching whichever mode you’re on and what your battery’s doing.

Three Different Modes

Smart Mode’s the one that works out your cartridge resistance and sets the right wattage automatically – the 0.4Ω gets 23-28W, the 0.6Ω runs 18-23W, the 0.8Ω sits at 12-18W, and the 1.2Ω gets 8-12W. Boost Mode ramps the power up beyond what Smart Mode’s set for bigger vapour and stronger flavour. Eco Mode does the opposite, dropping the wattage down to stretch your battery and e-liquid further between refills and charges.

J and JR Cartridges

The Digi Pro works with two types of cartridges – J cartridges have built-in coils so you swap the whole thing when it’s done, and JR cartridges let you just change the coil and keep using the same cartridge. Both hold 2ml and use the same resistances (0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω) so you can pick whichever setup you prefer. The 0.4Ω and 0.6Ω work for RDL vaping and the 0.8Ω and 1.2Ω are better for MTL with nic salts.

Top Airflow and Leak Protection

The airflow control’s on top of the cartridge where you can turn it to adjust between tight MTL and loose RDL draws. Having it up top keeps e-liquid away from the airflow channel which stops leaks, and there’s silicone seals plus a liquid diversion plate inside stopping spills when you’re refilling. The airflow ring locks where you set it so it won’t move around in your pocket.

Button or Auto-Draw with A-Lock

You can fire the Digi Pro by pressing the button or just taking a draw, whichever you prefer. The A-lock’s controlled through the touchscreen and it locks the fire button so it won’t activate in your pocket or bag, just tap the lock icon to turn it on or off.

Geekvape Digi Pro Specifications

Geekvape Digi Pro Cartridge Resistance Options

• 0.4Ω J/JR Cartridge – RDL (23-28W) – Best with 50/50 freebase
• 0.6Ω J/JR Cartridge – RDL (18-23W) – Works with 50/50 and nic salts
• 0.8Ω J/JR Cartridge – MTL (12-18W) – Good for nic salts and 50/50
• 1.2Ω J/JR Cartridge – MTL (8-12W) – Tight draw for higher nic salts

Geekvape Digi Pro Colour Options

The Digi Pro comes in eight colours – Pearl White, Moon Silver, Gunmetal Grey, Black, Misty Blue, Ruby Red, Sakura Pink, and Lavender Haze. What’s in stock changes so check the dropdown menu on the page.

Why Choose the Geekvape Digi Pro Pod Kit

The Geekvape Digi Pro’s got a 2000mAh battery and 40W output in a touchscreen pod kit with three modes and 30-minute charging. Most pod kits with screens just show you information but this one’s actually interactive – you swipe between modes and tap settings instead of pressing button combinations. Smart Mode works out which cartridge you’re using and sets the wattage on its own, Boost Mode cranks it up for bigger hits, and Eco Mode drops it down to save battery.You’re getting both J cartridges with built-in coils and JR cartridges with replaceable coils so you can pick whether you want to swap the whole thing or just change coils. The 2000mAh battery lasts longer than most touchscreen pod kits and the 30-minute charge is one of the fastest at this capacity. Top airflow covers MTL through to RDL and the A-lock stops it firing when you don’t want it to.The Digi Pro, part of the Digi Vape range, is for vapers who want a real touchscreen with swipe controls instead of just a display screen. The RGB lights give you visual feedback and the three modes mean you’re not stuck on one power setting. It’s one of the better touchscreen pod kits that’s actually interactive rather than just showing numbers.

What’s In The Box?

• 1 x Geekvape Digi Pro Pod Kit (2000mAh)
• 1 x 0.4Ω J Pod Cartridge
• 1 x 0.6Ω J Pod Cartridge
• 1 x USB-C Cable
• 1 x Promotional Card
• 1 x User Manual